INFO
This Lightspeed ANR headset allows for cell phone and audio input for CD player or audible checklist (not included). Provides 22-24dB of active noise cancellation and a passive NRR of 12-22dB. Features soft, 1 1/2" thick temperature sensitive Confor-Foam ear seals and includes a padded headset bag and electret microphone with windscreen. Compact in-line power supply houses dual volume controls and stereo/mono switch. Two AA batteries last more than 50 hours. Three-color LED indicates high/medium/low battery status. Weighs 15 oz.; three year warranty.
Imported.
• Cell/Satellite Phone Interface
• Patented AES™ "Auto Shut-Off" Powers Down the Active Electronics if System is Left Unattended
• Small In-Line Battery Control Box
• Battery Status Indicator
• ANR Power for more than 50 Hours on just Two AA Batteries
• Auxiliary Audio Interface for Music or Audible Checklist/Warnings
• Dual Volume Controls, Stereo or Mono switchable
• Adjustable Gain Pre-amp Allowing for Field 'Balancing' of Mic Sensitivities
• Soft 1-1/2" Thick Temperature Sensitive Confor-Foam™ Ear Seals
• Weighs Just 15 Ounces
• 3-Year Warranty
• Padded Headset Bag, Mic Wind Screen, and Batteries Included
TECH SPECS
General Data
Connectors: .250" Stereo Headphone Plug .206" Stereo Microphone PlugPower Supply: Small In-Line with Left and Right Ear Level Control, Stereo/Mono Switch, Powered by Two AA BatteriesBattery Status Indicator: Red LED Low Battery IndicatorOperating Time: Over 50 HoursWeight: 15 oz Headphone DataTransducer: Dynamic, Selective Frequency Amplified for Enhanced Speech IntelligibilityFrequency Response: 17-24,000 HzNominal Impedance: 300 ohms Stereo 150 ohms Mono Microphone DataTransducer Principle: Noise Cancelling ElectretFrequency Response: 200-5000 HzMaximum SPL: 114 dBTerminating Impedance: 470 ohmsOperating Voltage: 8-16 V DC Appx 5-12mA
OTHER INFO and FEEDBACK
Lightspeed Headset Comparison Chart (pdf)
Lightspeed FAQs (pdf)
Cell Phone Compatibility
All new LightSPEED headsets are shipped with a cell phone patch cord which has what is commonly known as a ‘2.5mm universal headset’ plug. This plug connects directly to the ‘handsfree headset’ jack on many phones; however there are some phones which require an adapter to connect the patch cord. The key to determine if your phone needs an adapter is the ‘handsfree headset’ connection on the phone. If it’s a small round jack there is a good possibility it will accept the patch cord provided. We have found that all Nokia and many Nextel & Samsung phones require an adapter, along with the Motorola V3 Razr. Most other manufacturer’s phones utilize the ‘universal 2.5mm headset’ connection. LightSPEED Aviation stocks two adapters which work with some Nokia phones and one for the Motorola V3 Razr. These are available for $10 from our webstore or by calling us.Other adapters, commonly referred to as a “2.5mm handsfree headset adapter” for your specific model phone, are available from a number of sources which may include your local cell service provider’s store or online vendors. A good source for cell phone accessory information is www.factorydirectcellular.com.
